SmartDrop®
FEATURES

Integrated Measurement
Workflow & Control

SmartDrop
Features in Detail

SmartDrop® is a surface and interface analysis platform that combines contact angle measurement, surface tension analysis, drop volume control, lighting tuning, tilting hysteresis, environment logging and data saving in one automated workflow.

OVERVIEW

Built for
precise drop shape analysis

Precision does not come from the algorithm alone. SmartDrop controls the entire measurement, from dispensing, volume measurement, stage leveling and camera alignment to lighting, tilting, environment logging and data saving, so results depend less on operator skill and stay repeatable.

01

Analysis Engine

The analysis engine that turns a drop image into precise drop shape and interfacial property data.

01
CORE · AXIS

GEM Engine

Precise drop shape analysis from the Young–Laplace equation

For every measurement, SmartDrop runs an automated numerical solution of the Young–Laplace equation (GEM) and relates drop shape, curvature, surface tension and contact angle with no geometric approximation. The hard part of any numerical solution is setting the initial and boundary conditions. SmartDrop has fully automated this step in its GEM-FSG analysis since the first release in 2012, and users value it for accuracy, repeatability and ease of use.

One GEM algorithm, no approximations · High-viscosity surface tension · Accurate into the superhydrophobic range · Contact angle and surface tension in one measurement

02
CORE · AXIS

Contact Angle + Surface Tension

Contact angle and liquid surface tension, analyzed together

Contact angle is not a property of the solid alone. It also depends on the liquid's surface tension, viscosity, composition and evaporation conditions. SmartDrop analyzes contact angle and liquid surface tension together, which supports studies of how coating liquids, cleaning solutions, electrolytes, inks and adhesives interact with surfaces. It measures and verifies surface tension for high-tension liquids such as water as well as for high-viscosity liquids above 300,000 cP.

Surface tension from both sessile and pendant drops, including high-viscosity liquids

03
CORE · AXIS

Pendant-Sessile Drop Surface Tension

High-viscosity surface tension that follows the drop as it relaxes

SmartDrop measures the surface tension of high-viscosity liquids from both pendant and sessile drops. The ISS (Iterative Stabilized Solution) method solves the Young–Laplace equation with the GEM Engine for each changing drop profile, tracking how the drop approaches equilibrium and how the surface tension value converges. The sessile drop method is especially convenient for long runs, since there is no risk of the drop detaching and ending the measurement.

Continuous numerical analysis of viscous drops · Pendant and sessile methods that cross-check each other

02

Measurement Stability

A controlled measurement environment and instrument state for repeatable results.

04
CORE · AXIS

Enclosed Tilting Architecture

An enclosure and internal tilting stage in one stable measurement space

CORE and AXIS come standard with an enclosed housing and an internal tilting stage, which minimize the effects of air currents and ambient light. Built-in temperature, humidity and acceleration sensors record temperature, humidity and vibration in real time, so every result carries the conditions at the moment of measurement. A tilt sensor in the tilting assembly keeps the sample stage level automatically, and a second sensor in the frame continuously monitors whether the instrument itself is level. An opening at the bottom lets dropped samples or small parts fall clear of the mechanism.

Real-time temperature, humidity and vibration logging · Automatic stage leveling

05
CORE · AXIS

Low-Vibration Tilting Control

Smooth tilting for contact angle hysteresis by the tilting plate method

In a tilting plate measurement, what matters is the moment the drop starts to move. SmartDrop's tilting stage uses low-vibration motor control to remove mechanical disturbance, so you can observe pinning, depinning and sliding behavior and read advancing and receding contact angles and the sliding angle reliably. A vibration sensor inside the stage measures vibration intensity in real time during tilting, letting you check whether the drop was disturbed, and a damped structure reduces the influence of external vibration.

Real-time stage vibration measurement · Vibration-damped structure

06
CORE · AXIS

Interchangeable Sample Plate

Easy sample mounting and flexible add-on modules

Good measurements on varied samples start with mounting them securely. The interchangeable sample plate lets you mount a sample outside the instrument, removing the usual inconvenience of loading samples into an enclosed system. Clip-on and adhesive plates handle different sample types, and functional plates such as a dispenser refill plate and a temperature/humidity control module plate can be added as needed. The design also makes maintenance much easier.

Clip and adhesive sample plates · Refill plate · Temperature/humidity module plate

Interchangeable Sample Plate

03

Automation & Control

Automated lighting, high-speed imaging, data saving and motion control that reduce operator-to-operator variation.

07
CORE · AXIS

Motorized Backlight & Camera Rotation

Lighting and camera control for precise, consistent analysis

In drop shape analysis, lighting is a measurement condition, not an accessory: it affects edge contrast, ghost images and the curvature analysis at the interface. CORE and AXIS use 2-axis control that continuously adjusts the iris aperture and shield, optimizing drop edge extraction and reducing ghost images to give the GEM Engine clean input. A motorized camera rotation axis also aligns the baseline to a tilted sample by physically rotating the camera rather than correcting the image, giving a reliable reference for locating the contact points.

2-axis control: continuously variable iris aperture + shield · Physical camera rotation

Motorized Backlight & Camera Rotation
08
CORE-HS · AXIS 848 fps / CORE-STD 200 fps

High Speed Dynamics

Drop dynamics from high-speed video at up to 848 fps with GEM analysis

Analyzing moving drops gives deeper insight into surface properties and helps define high-resolution QC processes. Beyond tilting and captive drop hysteresis, SmartDrop offers High Speed Dynamics mode for dynamics you define yourself. Design a dispensing motion, record the deposition and the drop's subsequent behavior at up to 848 fps, and the software analyzes the high-speed video automatically and saves volume, contact angle and surface tension results. At the standard rate (30 fps), you can operate the dispenser and stage while recording, so many dynamic situations can be captured without any setup.

Set up → record video → automatic analysis → results displayed and saved

09
CORE · AXIS

Automatic Data & Image Archiving

Results, environment data and drop images saved automatically

Measurement results are saved automatically as CSV files, together with the drop images. The software creates date-based folders and file names, which cuts out manual typing, forgotten saves and file management mistakes. After saving, it points you straight to the results folder, making repeat experiments and report writing easier.

Contact angle · surface tension · drop volume · drop image · temperature · humidity · vibration · tilt/roll/yaw angles

10
CORE 10-axis · AXIS 18-axis

Fully Motorized Compact Architecture

A multi-axis motorized platform designed in-house

SmartDrop motorizes every key motion: drop dispensing, camera focus, camera rotation, sample positioning, tilting and lighting. AXIS extends this to a rotating stage and QOD control. Because the core motion modules are designed in-house, SmartDrop reduces manual operation while keeping the instrument compact and reasonably priced.

CORE: tilting · camera · stage · dispenser · 2-axis backlight / AXIS: + rotating stage · QOD

04

Advanced Functions

AXIS options for advanced research, plus convenience features for continuous measurement.

11
AXIS

QOD, Quad On-Head Dispenser

Tubeless 4-fluid automatic dispensing

AXIS mounts up to four syringe dispensers directly on the instrument head. This QOD design avoids the cleaning burden, dead volume, response lag and tedious liquid changes of tube-based multi-fluid systems, and automates 4-fluid surface free energy analysis.

Automated 4-fluid surface free energy measurement

QOD, Quad On-Head Dispenser
12
AXIS-360

360° 3D Droplet Analysis

Contact angle profile around the full contact line

With a rotating stage, AXIS views a single drop from many angles and analyzes the contact angle profile around its perimeter. This reveals 3D wetting information that a single viewing direction can miss, such as on anisotropic or patterned surfaces, non-uniform coatings and directional wafer surfaces.

360° contact angle profile · Drop axisymmetry check · Anisotropic surface analysis

13
AXIS-360-WFR

4-inch Wafer Research Analysis

Precise interfacial analysis for wafer process research

AXIS offers a 4-inch wafer analysis option. It is not meant to replace multi-point QC tools on a production line; it is a research function for detailed study of liquid–surface interactions in wafer cleaning, coating and photoresist (PR) processes. Contact angle, hysteresis, surface tension, surface free energy and 3D drop analysis can be combined to evaluate how wafer surface properties change with process conditions.

14
CORE · AXIS

Syringe Recharge System

Semi-automatic refilling without removing the syringe

Disposable, detachable syringes are easy to maintain and make it simple to switch liquids, but refilling them is more work than with a continuous pump. The refill plate and automated refill workflow on the CORE and AXIS platforms make refilling quick and easy, so you can run more measurements without delays.

WORKFLOW SUMMARY

An automated platform
that manages every measurement condition

SmartDrop's automation goes beyond software. Dispensing, volume measurement, sample position, tilt angle, camera alignment, lighting, environment data and data saving are all integrated through motorized hardware and GEM Engine analysis software into one precise measurement workflow.

CONTACT

Considering SmartDrop
for your lab?

Send us your samples, measurement goals or questions about pricing, demos and remote installation. We reply by email within 2 business days (KST).

E-mail

smartdrop@femtobiomed.com

Website

www.smartdropglobal.com

Company

FEMTOBIOMED Inc.