SmartDrop®
TECHNOLOGY

Integrated Droplet Analysis
Platform Technology

Integrated technology
for precise drop shape analysis

SmartDrop® is an automated surface analysis platform. Along with numerical Young–Laplace analysis, it integrates every step of the measurement: drop dispensing, volume measurement, camera alignment, lighting, tilting control, environment logging and data saving.

SmartDrop contact angle and surface tension measurement technology

MEASUREMENT

Many measurements,
one platform

SmartDrop is more than a contact angle goniometer. It is an integrated surface analysis system that also measures surface tension, surface free energy, contact angle hysteresis and time-dependent wetting.

01

Contact Angle

Measures the static contact angle from the shape of a sessile drop on a solid surface.

CORE · AXIS
02

Contact Angle Hysteresis

Characterizes surface hysteresis from advancing and receding contact angles and sliding behavior, using the tilting plate or captive drop method.

CORE · AXIS
03

Liquid Surface Tension

Measures the interfacial properties of the liquid itself by the pendant drop or pendant-sessile drop method.

CORE · AXIS
04

Surface Free Energy

Calculates the surface free energy of a solid from contact angle data. CORE offers 1-fluid analysis; AXIS offers 4-fluid analysis with the QOD dispenser.

CORE · AXIS
05

Evaporation / Absorption / Wetting

Monitors changes in drop shape, contact angle and volume over time.

CORE · AXIS
06

High-Speed Interfacial Measurement

Analyzes fast-changing drop behavior with a high-speed camera at up to 848 fps. (CORE-STD: up to 200 fps)

CORE-HS · AXIS

FSG TECHNOLOGY

Free Surface Goniometry

Conventional contact angle methods can depend on where the operator places fitting points or contact points. SmartDrop's FSG automatically uses many interface data points along the drop's free surface, reducing variation caused by operator choices.

✓Minimal manual contact point selection
✓Less error from drop size
✓Better repeatability across measurements

GEM ENGINE

Young–Laplace
numerical analysis

For every measurement, SmartDrop solves the Young–Laplace equation numerically to relate drop shape, curvature, contact angle and surface tension. Simple approximations such as circle or ellipse fitting lose accuracy as drops get larger and gravity flattens them, so SmartDrop analyzes the full drop profile instead. Its gravity-compensated contact angle method is protected by Korean patent KR 10-1935445.

✓Numerical solution of the Young–Laplace equation
✓Accounts for gravitational distortion of the drop (Korean patent KR 10-1935445)
✓Physically consistent contact angle and surface tension
SmartDrop CORE with GEM Engine analysis software showing a sessile drop profile

MEASUREMENT ARCHITECTURE

Beyond the algorithm:
control of every condition

Precision does not come from the algorithm alone. SmartDrop controls the entire measurement, from dispensing, volume measurement, stage leveling and camera alignment to lighting, tilting, environment logging and data saving, so results depend less on operator skill and stay repeatable.

Enclosed Tilting Architecture

CORE and AXIS use an enclosed housing with an internal tilting stage to reduce the effects of air currents and ambient light and keep hysteresis measurements stable.

CORE · AXIS

Stage Level & Optical Alignment

Logs temperature, humidity and tilt angle, plus roll angle and baseline tilt depending on the model. The camera rotates physically to align the baseline, so the original image quality is preserved.

CORE · AXIS

Low-Vibration Tilting Control

Low-vibration motor control on the tilting stage lets you observe pinning, depinning and the onset of sliding reliably.

CORE · AXIS

Droplet Volume & Auto Dispensing

Measures drop volume in real time during dispensing and forms each drop automatically at the target volume you set. Volume changes during the measurement are recorded alongside contact angle and surface tension data.

CORE · AXIS

Motorized Backlight System

Motorized lighting control optimizes edge contrast and reduces ghost images. CORE and AXIS support a continuously variable iris aperture and chopping control.

CORE · AXIS

Automatic Data & Image Archiving

Results are saved as CSV files together with the drop images. Date-based folders and file names prevent missed saves and file management errors.

CORE · AXIS

AUTOMATED WORKFLOW

From drop deposition
to analysis and saved data

Under standard conditions, one press of the auto-measure button runs the full sequence: dispensing, volume measurement, image capture, baseline detection, contact angle and surface tension analysis, and data saving.

01
Dispense drop
02
Measure volume
03
Capture image
04
Detect baseline
05
Analyze contact angle / surface tension
06
Save CSV
07
Save image

ADVANCED TECHNOLOGY

Extended capabilities
for advanced analysis

CORE and AXIS offer extended functions for advanced research, including high-speed video analysis, pendant-sessile drop surface tension, QOD-based 4-fluid analysis and 360° drop analysis.

Pendant-Sessile Drop Surface Tension

CORE and AXIS measure surface tension from sessile drops as well as pendant drops. This is useful for high-viscosity liquids above 300,000 cP, liquids that keep flowing, and liquids whose shape changes on the surface.

CORE · AXIS

QOD, Quad On-Head Dispenser

AXIS mounts up to four syringe dispensers directly on the instrument head. The QOD design avoids the cleaning burden, dead volume and response lag of tube-based systems and automates 4-fluid surface free energy analysis.

AXIS

360° 3D Droplet Analysis

With a rotating stage, AXIS views one drop from many angles and analyzes the contact angle profile around its perimeter. Use it to evaluate anisotropic surfaces, patterned surfaces and non-uniform coatings.

AXIS option

4-inch Wafer Research Analysis

AXIS offers a 4-inch wafer analysis option for research on wafer cleaning, coating and photoresist (PR) processes. It is a precision research function, not a production-line QC tool.

AXIS option

848 fps High Speed Dynamics

CORE-HS and AXIS use movie analysis from a high-speed camera at up to 848 fps to study dynamic wetting: spreading, evaporation, absorption, sliding, recoil and stick-slip motion. CORE-STD offers the same analysis at up to 200 fps.

CORE-HS · AXIS

Fully Motorized Compact Architecture

SmartDrop motorizes every key motion, including drop dispensing, camera focus, camera rotation, sample positioning, tilting and lighting, to minimize manual operation.

CORE · AXIS

RESULT

Designed for Repeatable Surface and Interface Data

By combining GEM Engine analysis software with motorized hardware, SmartDrop delivers the repeatability and reliability that university labs, government research institutes and corporate R&D centers require.

CONTACT

Considering SmartDrop
for your lab?

Send us your samples, measurement goals or questions about pricing, demos and remote installation. We reply by email within 2 business days (KST).

E-mail

smartdrop@femtobiomed.com

Website

www.smartdropglobal.com

Company

FEMTOBIOMED Inc.